How to Set a Weight Based Dose

Learn the ins and outs of configuring a weight-based dose on your Automed device with this guide, ensuring accurate and efficient medication dosing tailored to each animal's specific weight.

How to set a weight-based dose

Step 1: Begin by inserting the battery into your Automed device and attaching an adapter. After the adapter is securely connected, activate the device by pulling the trigger until the "Configure" menu option appears on the screen.

Step 2:  In the configure menu, choose the "Weight" option, and then press and hold the trigger to enter the manual configuration mode.

Step 3: Pull the trigger once more until you hear a "Beep". After this, a screen will appear that enables you to set your weight-based dose rate.

Step 4: To set the weight-based dose, continue pulling the trigger until you reach the desired dose rate. Once you've selected the correct value, press and hold the trigger until the device emits a beep, confirming your selection. If you make an error, simply detach the adapter and start the process over. After the dose is set, the device will display the Start screen.

Step 5: Before proceeding, make sure that your scale head, such as the Gallagher TW, is properly connected to your Automed Device. For detailed instructions on establishing this connection, please refer to our guide on how to connect your Gallagher TW scale head.



Leave a comment

Please note, comments need to be approved before they are published.